Mercury 250 Specifications download pdf (Page 117)

OUTBOARD INSTALLATION

109

d. Turn the ignition key switch to the "ON" position for three

seconds. This operates the electric fuel pump.

26846

e. Turn the ignition key switch back to the "OFF" position, and

squeeze the primer bulb again until it feels firm.

f. Turn the ignition key switch to the "ON" position again for

three seconds.

g. Continue this procedure until the fuel primer bulb stays firm.

2. Turn the ignition key switch to the "ON" position.

3. Within the first 10 seconds after the key switch has been

turned on, move the remote control handle from neutral into

forward. This will automatically start the priming process.

PURGING AIR FROM THE ENGINE OIL TANK

1. Loosen the fill cap on the engine oil tank.

2. Start the engine.

3. Operate the engine until all the air has vented out and oil starts

to flow out of the tank.

4. Retighten fill cap.

1 2 ... 112 113 114 115 116 117 118 119 120

No comments

Mercury 250 Specifications Page 117