Mercury 250 Specifications download pdf (Page 51)

FEATURES AND CONTROLS

3. Disengage the tilt support lever, by raising the outboard off the

support lever and rotating the lever down. Lower the outboard.

27778

a - Tilt support lever b - Knob

MANUAL TILTING

If the outboard cannot be tilted using the power trim/tilt switch, the

outboard can be manually tilted.

NOTE: The manual tilt release valve must be tightened before

operating the outboard to prevent the outboard from tilting up

during reverse operation.

1. Turn out the manual tilt release valve 3 turns

counterclockwise. This allows manual tilting of the outboard.

Tilt the outboard to the desired position and tighten the manual

tilt release valve.

22362

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 119 120

No comments

Mercury 250 Specifications Page 51