Mercury 250 Specifications download pdf (Page 108)

OUTBOARD INSTALLATION

100

Locating the Center Point of the Shift Cable

IMPORTANT: Locate the center point of the slack or lost motion

that exists in the shift cable for proper adjustment of the shift cable.

1. Mark the forward position as follows:

a. Move the remote control handle from neutral into forward

and advance the handle to the full speed position. Ensure

that the throttle control lever is touching the throttle control

lever stop screw.

b. Slowly return the handle back to the neutral detent position.

c. Place a mark on the shift cable against the cable end guide.

29076

a - Forward position mark

2. Mark the reverse position as follows:

a. Move the remote control handle into reverse and advance

the handle to the full speed position. Ensure that the throttle

control lever is touching the throttle control lever stop

screw.

b. Slowly return the handle back to the neutral detent position.

c. Place a mark on the shift cable against the cable end guide.

29077

a - Reverse position mark

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 119 120

No comments

Mercury 250 Specifications Page 108