Mercury 250 Specifications download pdf (Page 110)

OUTBOARD INSTALLATION

102

2. Place the shift cable end guide on the anchor pin and adjust

the cable barrel so that it slips freely into the barrel holder.

3. Secure the shift cable to the anchor pin with the retainer clip.

28749

a - Cable barrel

b - Shift cable retainer

c - Retainer clip

4. Check the shift cable adjustments as follows:

a. Shift the remote control to forward while turning the

propeller shaft. If the propeller shaft does not lock in gear,

adjust the cable barrel closer to the cable end guide.

b. Shift the remote control into neutral. If the propeller shaft

does not turn freely without drag, adjust the barrel away

from the cable end guide. Repeat steps a and b.

c. Shift the remote control into reverse while turning the

propeller shaft. If the propeller shaft does not lock solidly in

gear, adjust the barrel away from the cable end guide.

Repeat steps a through c.

d. Return the remote control handle to neutral. If the propeller

shaft does not turn freely without drag, adjust the barrel

closer to the cable end guide. Repeat steps a through d.

INSTALLING THE THROTTLE CABLE

IMPORTANT: Attach the shift cable to the engine prior to attaching

the throttle cable.

1. Shift the remote control into the neutral position.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 119 120

No comments

Mercury 250 Specifications Page 110