Mercury 250 Specifications download pdf (Page 58)

OPERATION

b. Turn the ignition key switch to the "ON" position for three

seconds. This operates the electric fuel pump.

c. Turn the ignition key switch back to the "OFF" position, and

squeeze the primer bulb again until it feels firm. Turn the

ignition key switch to the "ON" position again for three

seconds. Continue this procedure until the fuel line primer

bulb stays firm.

7. Do not advance the throttle‑only feature on the remote control

for starting.

27242

8. Turn the ignition key to "START" position. Release the key

when engine starts. If engine fails to start in 10 seconds, return

the key to "OFF" position, wait one second and try again.

19804

NOTE: The electronic starting system will automatically prime

(choke) the engine and increase idle speed for starting.

9. Check for a steady stream of water flowing out of the water

pump indicator hole.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 119 120

No comments

Mercury 250 Specifications Page 58