Mercury D2.8L D-Tronic Specifications Page 93

  • Download
  • Add to my manuals
  • Print
  • Page
    / 160
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 92
MAINTENANCE
SECTION 5
CMD-4081850 / 90-860094030 SEPTEMBER 2003 Page 85
00000 was 0142.01 w / CMD changes
Drive Unit Oil
CAUTION
ENVIRONMENTAL HAZARD! Discharge of oil or oil waste into the environment is
restricted by law. Do NOT spill oil or oil waste into the environment when using or
servicing your boat. Contain and dispose of oil or oil waste as defined by local
authorities.
Checking
NOTE: Oil level will fluctuate during operation. Oil level should be checked with the engine
cold, before starting.
1. Check the gear lube oil level. Keep the oil level at or near FULL line in the drive lube
monitor. If any water is visible at the bottom of the monitor or appears at the oil fill/drain
plug and/or if oil appears discolored, contact your authorized Cummins MerCruiser
Diesel dealer / distributor immediately. Both conditions may indicate a water leak
somewhere in the sterndrive unit.
a
75301
79148
Typical gear lube monitor location
a-Gear lube monitor
Description
Where Used Part Number
High Performance Gear Lube Gear lube monitor 92-802854A1
Page view 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 159 160

Comments to this Manuals

No comments