MAINTENANCE
SECTION 5
Page 110 CMD-4081850 / 90-860094030 SEPTEMBER 2003
0160.01
INSTALLATION
77107
f
e
d
c
b
a
a-Rear propeller nut
b-Rear propeller
c-Rear propeller thrust hub
d-Front propeller nut
e-Front propeller
f-Front propeller thrust hub
1. Apply a liberal coat of one of the following lubricants to the propeller shaft.
Description
Where Used Part Number
Anti-Corrosion Grease 92-802867A1
Special Lubricant 101
Propeller shaft
92-802865A1
2-4-C with Teflon
92-802859A1
2. Slide forward thrust hub onto propeller shaft with tapered side toward propeller hub
(toward end of shaft).
3. Align splines and place propeller on propeller shaft.
4. Install and torque the propeller nut. Check propeller at least every 20 hours of operation
and retorque as needed.
Description
Nm lb-in. lb-ft
Forward Propeller Nut
1
136 100
1
The propeller torque stated is the minimum torque value.
5. Slide aft thrust hub onto propeller shaft, with tapered side toward propeller hub (toward
end of shaft).
6. Align splines and place propeller on propeller shaft.
CAUTION
Avoid Injury: Periodically check propeller nut for tightness during boating season.
A minimum of 60 lb-ft (81 Nm) torque is required.
Comments to this Manuals