Mercury Mountaineer 2005 User Manual download pdf (Page 241)

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Lubricant specifications section in this chapter.

Note: Only one ATF fluid specification has been tested and approved for

use with 6-speed—Premium Automatic Transmission fluid. Mercon fluids

cannot be used in a automatic 6-speed without damage or voiding

warranty.

Use of a non-approved automatic transmission fluid may cause

internal transaxle component damage.

If necessary, add fluid in 1/2 pint (250 mL) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of

transmission fluid may cause

shift and/or engagement concerns and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

MOTORCRAFT PART NUMBERS

Component 3.0L DOHC V6 Duratec engine

Engine air filter element FA-1771

Fuel filter FG-1060

Battery BXT-36R

Oil filter FL-820-S

PCV valve

Spark plugs

The PCV valve is a critical emission component. It is one of the items

listed in the scheduled maintenance information and is essential to

the life and performance of your vehicle and to its emissions system.

For PCV valve replacement, see your dealer or a qualified service

technician. Refer to scheduled maintenance information for the

appropriate intervals for changing the PCV valve.

2005 Montego (mgo)

Owners Guide (post-2002-fmt)

USA_English (fus)

Maintenance and Specifications

241

1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 263 264

No comments

Mercury Mountaineer 2005 User Manual Page 241