Mercury Mountaineer 2005 User Manual download pdf (Page 35)

Vertical aim adjustment

1. Park the vehicle directly in front of a wall or screen on a level surface,

approximately 25 feet (7.6 meters) away.

• (1) 8 feet (2.4 meters)

• (2) Center height of lamp to

ground

• (3) 25 feet (7.6 meters)

• (4) Horizontal reference line

2. Measure the height of the

headlamp bulb center from the

ground and mark an 8 foot

(2.5 meter) horizontal reference line

on the vertical wall or screen at this

height (a piece of masking tape works well).

3. Turn on the low beam headlamps to illuminate the wall or screen and

open the hood.

To see a clearer light pattern for adjusting, you may want to block the

light from one headlamp while adjusting the other.

4. On the wall or screen you will

observe an area of high intensity

light. The top of the high intensity

area should touch the horizontal

reference line, if not, the beam will

need to be adjusted using the next

step.

5. Locate the vertical adjuster on

each headlamp. Using a Phillips #2

screwdriver, turn the adjuster either

clockwise (to adjust down) or

counterclockwise (to adjust up).

The horizontal edge of the brighter

light should touch the horizontal

reference line.

6. Close the hood and turn off the

lamps.

HORIZONTAL AIM IS NOT

REQUIRED FOR THIS VEHICLE

AND IS NON-ADJUSTABLE.

2005 Montego (mgo)

Owners Guide (post-2002-fmt)

USA_English (fus)

Lights

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 263 264

No comments

Mercury Mountaineer 2005 User Manual Page 35