Mercury 1000 Dual Fuel User's Guide download pdf (Page 30)

INSTALLATION

Check the appliance is electrically safe when you have nished.

Final Fitting

Fitting the Bottom Panel

Open the ovens doors.

On the front of the cooker base there are two mounting

plates. Remove the three xing screws from each plate.

Fit the retaining brackets to the mounting plates and ret the

screws (Fig.7-17). DO NOT tighten at this stage.

Tilt the bottom of the panel slightly to locate the lower slots

onto the washers (Fig.7-18). Now rotate the panel to t over

the pins (Fig.7-19).

Using the two screws supplied, secure the bottom panel onto

the brackets. DO NOT tighten at this stage.

Adjust the bottom panel to align it with the door panels.

When it is positioned correctly, use a suitable at open ended

spanner to tighten the bracket screws, and then tighten the

bottom panel screws.

Customer Care

Installer: Please complete your details in this guide, inform

the user how to operate the cooker and hand over the

instructions.

Thank you.

Plinth

Fig.7-17

Front left Front right

Locating

washer

Plinth

Fig.7-19Fig.7-18

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Mercury 1000 Dual Fuel User's Guide Page 30