Mercury KOB WL560 User Manual download pdf (Page 13)

JP6 3 pin USB2/3 power

1-2: Disable

2-3: Enable

JP6

JP7 3 pin Clear CMOS

1-2: Normal

2-3: Clear

JP7

Jumper 1 –

Enable this jumper if you want keyboard or USB activity to awaken the system

from power saving mode.

Jumper 3 –

Use this jumper to select the CPU frequency.

Jumper 4 –

Selects the BIOS voltage parameters. DO NOT make any adjustments to this

jumper.

Jumper 5 –

Enables you to prevent the BIOS from being updated (flashed). Set the

jumper to disabled if you are going to update your BIOS. After updating the

BIOS, return it to the default setting (enabled). For instructions on updating

the BIOS refer to Chapter 3.

Jumper 6 –

Enable this jumper if you want device activity on front panel USB ports 2/3

activity to turn on the computer.

Jumper 7 –

Enables you to clear the BIOS:

1. Turn the system off.

2. Short pins 2 and 3 on jumper 7.

3. Return the jumper to the normal setting.

4. Turn the system on. The BIOS is returned to the default set-

tings.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 52 53

No comments

Mercury KOB WL560 User Manual Page 13