Mercury Mountaineer 2001 User Manual download pdf (Page 104)

Memory seat feature (if equipped)

The remote entry system can also

control the memory seat feature.

Press the control once to unlock the

driver’s door and move the memory

seat feature to the corresponding

memory position, just as if you had

pressed the memory control in the

vehicle.

When your dealer programs new

transmitters:

• the first transmitter programmed will recall memory position one.

• the second transmitter programmed will recall memory position two.

• the third transmitter programmed will recall memory position three.

• the fourth transmitter programmed will not recall a memory position.

Memory positions can be changed at any time. The memory feature can

be deactivated or reactivated by performing the following:

1. Make sure the ignition is off and all doors and the liftgate window are

closed.

2. Turn the ignition key from OFF to ON.

3. Press the power door unlock control three times.

4. Turn the ignition key from ON to OFF.

5. Press the power door unlock control three times.

6. Turn the ignition back to ON. The horn will chirp.

7. Press the unlock control two times, then press the lock control. The

horn will chirp twice if the remote memory seat feature was deactivated

or will sound three times (two short chirps followed by one long chirp) if

the feature was activated.

8. Turn the ignition to OFF. The horn will chirp once to confirm that you

activated or deactivated the remote memory seat feature.

The memory feature will continue to work from the door control even

when deactivated at the remote entry module.

Controls and features

104

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 279 280

No comments

Mercury Mountaineer 2001 User Manual Page 104