Mercury 250 Specifications download pdf (Page 48)

INSTALLATION

38 eng

Installing Outboard

WARNING

Failure to correctly fasten the outboard could result in the

outboard propelling off the boat transom resulting in property

damage, serious injury, or death. Before operation, the

outboard must be correctly installed with the required mounting

hardware. Do not accelerate above idle speed in water that

may contain underwater obstacles if the outboard is not

attached to the transom correctly.

IMPORTANT: For optimum boat performance and detailed

engine installation instructions, refer to the outboard installation

manual, supplied with the outboard.

We strongly recommend that your dealer install your outboard

and related accessories to ensure proper installation and good

performance. If you install the outboard yourself, follow

instructions in the Outboard Installation Manual which is provided

with the outboard.

The outboard must be secured to the boat transom with the four

12.7 mm (1/2 in.) diameter mounting bolts, locknuts and washers

provided. Install two bolts through the upper set of mounting

holes and two bolts through the lower set of mounting slots.

28923

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 159 160

No comments

Mercury 250 Specifications Page 48