Mercury Grand Marquis 2002 User Manual download pdf (Page 68)

WINDSHIELD WIPER/WASHER CONTROLS

Rotate the windshield wiper control

to the desired interval, low or high

speed position.

The bars of varying length are for

intermittent wipers. When in this

position rotate the control upward

for fast intervals and downward for

slow intervals.

Push the control on the end of the

stalk to activate washer. Push and

hold for a longer wash cycle.

WINDSHIELD WIPER BLADES

Check the wiper blades at least twice a year or when they seem less

effective. Substances such as tree sap and some hot wax treatments used

by commercial car washes reduce the effectiveness of wiper blades.

Windshield wiper/washer features

The exterior lamps will illuminate when the ignition is ON and the

windshield wiper control is in the interval, LO or HI position.

The lights will remain in on until 30 seconds after the wipers are turned

off.

Checking the wiper blades

If the wiper blades do not wipe properly, clean both the windshield and

wiper blades using undiluted windshield wiper solution or a mild

detergent. Rinse thoroughly with clean water. To avoid damaging the

blades, do not use fuel, kerosene, paint thinner or other solvents.

Changing the wiper blades

To make changing the wiper blades easy, turn the ignition to ACC, then

turn the wipers on. When the wipers reach the vertical position, turn the

ignition to LOCK.

OFF

Driver Controls

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 247 248

No comments

Mercury Grand Marquis 2002 User Manual Page 68