Mercury PVCLE266M-L Specifications download pdf (Page 14)

PS/2 Mouse

Use the upper PS/2 port to connect a PS/2

pointing device.

PS/2 Keyboard

Use the lower PS/2 port to connect a PS/2

keyboard.

LPT1

Use LPT1 to connect printers or other

parallel communications devices.

COM1

Use the COM port to connect serial devices

such as mice or fax/modems. COM1 is

identified by the system as COM1.

VGA

Use the VGA port to connect VGA devices.

LAN Port

(optional)

Connect an RJ-45 jack to the LAN port to

connect your computer to the Network.

USB Ports

Use the USB ports to connect USB devices.

Note: The lower USB port located beside the

VGA port is shared with the J5 connector.

Audio Ports

Use the three audio ports to connect audio

devices. The first jack is for stereo Line-In

signal. The second jack is for stereo Line-

Out signal. The third jack is for

Microphone.

Installing Memory Modules

This motherboard accommodates two 184-pin 2.5V unbuffered

Double Data Rate SDRAM (DDR SDRAM) DIMM sockets, and

supports up to 2.0 GB of 100/133 MHz SDRAM or 200/266MHz

DDR.

DDR SDRAM provides 1.6 GB/s and 2.1 GB/s data transfer rate,

depending on whether the bus is 100 MHz or 133 MHz.

DDR SDRAM is a type of SDRAM that supports data transfers on

both edges of each clock cycle (the rising and falling edges),

effectively doubling the memory chip’s data throughput. DDR

DIMMs can synchronously work with 200 MHz or 266 MHz

memory bus.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 38 39

No comments

Mercury PVCLE266M-L Specifications Page 14