Mercury Tracer 1997 User Manual download pdf (Page 6)

Kit Assembly 99-5720

DIN radio provision

1. Locatethefactorywiringharnessinthedash.Metrarecommendsusingthe

propermatingadapterfromMetraorAXXESS. Reconnectthenegative

batteryterminalandtesttheradioforproperoperation.

2. SlidetheDINcageintotheintegratedmountingkitandsecurebybendingthe

metallockingtabsdown.

3. Slidetheaftermarketradiointothecageuntilsecure.(FigureA)

(Figure A)

• ConnecttheYellowwiretothe12-voltconstantwire.

• ConnecttheRedwiretotheignition/accessorywire.

• ConnecttheOrangewiretotheilluminationwire(Iftheaftermarketradiohas

noilluminationwire,capofftheOrangewire).

• ConnecttheBlack wiretothegroundwire.

• ConnecttheBluewiretotheantennaturnonwire.

• ConnecttheWhitewiretotheleftfrontpositivespeakeroutput.

• ConnecttheWhite/Blackwiretotheleftfrontnegativespeakeroutput.

• ConnecttheGraywiretotherightfrontpositivespeakeroutput.

• ConnecttheGray/Blackwiretotherightfrontnegativespeakeroutput.

• ConnecttheGreen wiretotheradio’sleftrearpositivespeakeroutput.

• ConnecttheGreen/Blackwiretotheradio’sleftrearnegativespeakeroutput.

• ConnectthePurple wiretotheradio’srightrearpositivespeakeroutput.

• ConnectthePurple/Blackwiretotheradio’srightrearnegative

speakeroutput.

Connections to be made

Harness Wiring 99-5720

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

No comments

Mercury Tracer 1997 User Manual Page 6